"Bioclean" is acustomized natural microbial / enzymatic product with specific strains that help to work treatment plant with less power consumption.
"Bioclean" is the unique biological formulation and a 100% green technology for best biomass reinforcement in aeration tank.
"Bioclean" is a consortium of vigorous and specific microbes that are good at degrading organic pollutants and can effectively help to maintain the outlet parameters of effluent within limits.
Uniqueness :
Most economical and eco-safe solution for treating industrial effluents. All our products are formulated at our in-house DSIR approved R & D laboratory and Haffkine certified manufacturing unit.
Benefits :
-Reinforce active biomass for optimum performance of treatment plant
-Maximum reduction of refractory COD and BOD in the effluent
-Effectively reduces the ammonical nitrogen, color and odor during biological treatment
-Maintains optimum sludge and proper MLSS development, ie. increases healthy / active biomass content in aeration tank
-Helps to enhance better food : microorganisms ratio
-Contributes majorly for very less power consumption
-Reduce biomass / Sludge generation
-Superior product that can easily handle toxic / shock load in treatment plant
-Ideal product to improve ETP efficiency
-Improved nitrification and denitrification process
'Bioclean ANB' is In-house formulated biological / enzymic product with collection of isolated natural robust microbial strains for effective anaerobic digestion in the wastewater treatment plant 'Bioclean ANB'– a consortium of powerful microbial strains of facultative group effectively degrades the organic wastes with minimal odour generation and maximum solid waste reduction. The microbes are micro-encapsulated to have better shelf life that are suitable for wide range temperature and environment Benefits : Completely breaks down the complex organic matter to biogas and carbon di oxide The specific microbial consortia in 'Bioclean ANB' helps in maximum production of biogas This is specific for degrading refractory organics Generate very minimum sludge in the process Low energy requirement Improves the efficiency of anaerobic treatment plant in handling hydraulic and shock loads Maximize the performance of Anerobic wastewater treatment plant Property: Natural and safe powder Application: For all anaerobic treatment Uniqueness: Customized product could be given, if needed. Active Ingredients: Consortium of effective beneficial microorganisms. May contain up to 76 - 96 different microbial strains. Packaging - 1 kg Pouch Available. Customised packaging can be done for higher order quantity and upon request
Supplier: Organic chemical, inorganic chemical, wastewater treatment, solvents, gases, industrial chemicals, ferric chloride, hydrochloric acid, aluminium sulphate, ferrous sulphate, trisodium phosphate
Buyer: Organic chemical, inorganic chemical, wastewater treatment, solvents, gases, industrial chemicals, ferric chloride, hydrochloric acid, aluminium sulphate, ferrous sulphate, trisodium phosphate
Ion exchange resins and adsorbent medias are often ideally suited for removal of specific contaminants and/or for polishing the effluent from other wastewater treatment processes. Suzhou X Chemical provides a large number of products for wastewater treatment including chelating resins, resins suitable for organic scavenging and resins for selected removal of specific contaminants, such as boron,XResinâ??s ion exchange resins are available in many container sizes, mesh sizes, and can be specially prepared to be pH buffered or in a specific ionic form, ready to use. Many of these products are also available with the WQA Gold Seal certification to the ANSI/NSF 61 standard for potable water
Description BLU Ferric Sulphate powder form is an effective coagulant, excellent for treating all kinds of drinking water, industrial water, wastewater and sewage, and phosphorus removal, struvite control as well as sludge conditioning. Advantages 1) High quality and efficient inorganic polymer coagulant. 2) Good coagulation function with thick flocs and fast sedimentation. 3) Excellent purifying effect. 4) Safe, reliable, nonpoisonous and harmless: doesn't contain any harmful substances such as aluminum, chlorine, heavy metal ions, pesticide, and water phase transference of iron ions. 5) Can be used in discolouring, dehydrating, deodorizing, degreasing, sterilizing as well as discarding heavy metal iron, radioactive substance and carcinogens in the water, and eliminate COD, BOD, and color. 6) Can treat water with PH from 4 to 11, (the optimum pH is 6-9), PH barely changes after treatment, and has little corrosiveness effect to the equipment 7) Has very good effect in purifying the river water with algae, low temperature and low urbidity, and slightly contaminated. 8) Has a better effect in purifying the high turbidity river water Application Fields 1. Drinking water purifying. 2. Sludge dewatering. 3. Industry waste water treatment (such as the paper making waste water, the printing waster water, the massacre waste water, the automobile manufacturing waste water, the beer factory waste water and so on.), 4. Many kinds of industry circulating water treatment (ex,the make-up water of the high pressure boiler in the heat and power plant, the industry waste water in biochemical treating factory, the waste emulsifying solution, the opalescent solution and the oil waste water. 5. Clarifying agent in Sugar, Medicine, Tanning, Cosmetic etc Mining water clarifying.
Ozone catalyst technology is an advanced oxidation process based on ozone. It combines the strong oxidizing properties of ozone with the adsorption and catalytic properties of the catalyst, and be proved more effectively solving the problem of low ozone treatment efficiency, low ozone utilization, high operating costs, and incomplete degradation of organics questions. The phase state of the ozone catalytic oxidation catalyst is divided into homogeneous catalytic ozonation and heterogeneous catalytic ozonation. In the homogeneous catalytic ozonation technology, the catalyst is uniformly distributed and has high catalytic activity, the mechanism of action is clear, and it is easy to study and grasp. However, its shortcomings are also obvious. The catalyst is miscible in water, causing it to be easily lost, difficult to recycle, and cause secondary pollution. The operating cost is high and the water treatment cost is increased. The heterogeneous catalytic ozonation method uses a solid catalyst to accelerate the oxidation reaction in the liquid phase (or gas phase) under normal pressure. The catalyst exists in a solid state, is insoluble in water, does not run off, has no secondary pollution, and reduces the operating cost of catalytic oxidation. The ozone catalytic oxidation method of wastewater is a large-scale advanced oxidation technology, which is mainly realized through two ways of direct oxidation and catalytic oxidation. Ozone can directly mineralize the large molecules, long chains, and difficult-to-biodegradable organic matter remaining in the wastewater into carbon dioxide and water, and partially decompose into small molecules and easily biodegradable substances, destroy the structure of non-biodegradable organic matter, reduce toxicity, and increase B/ C ratio, so as to ensure the treatment effect of subsequent biochemical methods. The traditional ozone oxidation technology is mainly direct oxidation, which has poor mass transfer effect, low ozone utilization rate, and high investment and operating costs.
New type, high quality, high efficiency by iron kind of inorganic polymer flocculant, mainly used for water purification effect is good, good water quality, does not contain harmful material such as aluminum, chlorine and heavy metal ions, nor iron ion to transfer water, non-toxic, harmless, safe and reliable, in addition to the turbidity, decoloring, deoiling, dewatering, bacteria, deodorization, algae removal, removal of COD, BOD in water and heavy metal ions such as high efficiency, etc. Also used in industrial wastewater treatment, such as printing and dyeing wastewater, in casting, paper making, medicine, tanning and otheraspects are also widely used.
Water treatment chemicals refer to a diverse group of substances used to improve the quality of water for various purposes. These chemicals encompass a wide range of applications, from disinfection with chlorine or ozone to remove harmful microorganisms, to coagulants and flocculants like alum and polymer additives that aid in the removal of suspended particles in wastewater treatment. pH-adjusting chemicals like lime and sodium hydroxide help balance the acidity or alkalinity of water, while corrosion inhibitors protect pipes and equipment. Additionally, scale inhibitors, activated carbon, and ion exchange resins are used to remove impurities and pollutants. Water treatment chemicals play a vital role in ensuring safe, clean, and potable water for consumption, industrial processes, and environmental protection.
Sewage treatment roots blower for aeration: Welcome to buy sewage treatment roots blower for aeration from fengyuan, which is one of the best sewage treatment roots blower, backwash roots blower manufacturers and suppliers in china. Sewage treatment roots blower work principle: In the pool to set the filler, the oxygenation of the sewage form the bottom, and sewage in the pool body in a flow state to ensure that the sewage and sewage filled in full contact, to avoid the biological contact oxidation pool there is uneven contact with the sewage and filler defects. Characteristics of sewage treatment roots blower for aeration: 1.Adopting the main and auxiliary tank lubrication according to the situation , not to make lubrication more reliable, and to solve the many problems of grease lubrication, effectively improve the bearing life. 2.Seal structure is reasonable, oil and gas can not enter the case, the output of the gas clean, non-oil and gas. 3.Each blower should be tested in strict accordance with national standards , commissioning qualified to complete machine assembly, to ensure the quality of the blower before leaving the factory. 4.Zhangqiu fengyuan sewage treatment roots blower for aeration casting resin sand technology, quality is fully guaranteed. 5.Sewage treatment roots blower for aeration chassis, wall panels from high-precision digital coordinate boring machine processing, high precision, quality and stability. Part parameter of sewage treatment roots blower for aeration: Product advantages of sewage treatment roots blower for aeration: 1.The product easy to maintain and maintain. 2. The product has low noise, easy maintenance and other advantages of late. 3. Fan compact and reasonable, covers an area of small. 4. With low noise, economical and durable, no lubrication, long life, good dynamic balance. Customers of fengyuan machinery: Packing and loading of the sewage treatment roots blower :
Supplier: Enzymes for pharma, food, dairy, baking and bakery, honey, sugar, brewery, distillery, detergent, textile, feed and waste water treatment.
water treatment chemicals such as boiler water treatment chemicals, cooling water treatment chemicals, r.o. plant chemicals, polyelectrolytes, corrosion inhibitors, sugar plant specialty chemicals, distillery chemicals, paper plant chemicals, textile chemicals, wastewater treatment chemicals.
Services: Manufacturer & exporter, consultant and formulators
